When to use it
Structuring an internal draft, supplier enquiry or tender review checklist before clauses receive technical and legal approval.
Specification tool · draft output
Fence Tender Specification Generator
Create a structured first draft while keeping unknown or unapproved technical requirements visible.
Specification builder
Generate editable, supplier-neutral tender text.
Known fields are inserted directly; missing fields remain explicitly subject to confirmation.
Draft specification text
Draft only. A responsible specifier must review product scope, local requirements, standards, foundations, installation, evidence and acceptance criteria before tender issue.
Review gate
Do not issue a generated paragraph without technical ownership.
The final specification controls purchasing and must map every claim to an applicable requirement or approved document.
Review required
Confirm the selected system, exact dimensions, tolerances, posts, foundations, gates, finishes, standards, test evidence, inspection, packing and installation responsibility.
How to use the result
A direct answer, plus the limits that travel with it.
Use the result as a planning input, preserve the original assumptions, and ask the supplier to confirm product-specific values.
The generator creates a neutral first draft from known fence and mesh requirements while leaving unconfirmed dimensions, standards and evidence visible for the responsible specifier.
Inputs that matter
System and application, geometry, opening and wire, posts and fixings, finish, gates, exact standards or evidence, interfaces and responsibilities.
Worked example
A draft can require a 2.4 m welded-mesh perimeter system and named gate openings while marking post section, foundations and evidence ‘to be advised’.
Common mistake
Issuing generated text without confirming local rules, tolerances, foundation design, evidence, inspection and installation responsibility.